HP GbE2c - Blc Layer 2/3 Fiber SFP Option User Manual

Viewing statistics 69
To display the following form, go to the Management Processor Statistics form. Select UDP Stats or SNMP Stats,
and scroll down.
SNMP statistics are described in the following table:
Table 50 SNMP Statistics
Statistic Description
snmpInPkts The total number of Messages delivered to the SNMP entity from the transport service.
snmpOutPkts The total number of SNMP Messages that were passed from the SNMP protocol entity to
the transport service.
snmpInTooBigs The total number of SNMP Protocol Data Units (PDUs) that were delivered to the SNMP
protocol entity and for which the value of the error-status field is too big.
snmpOutTooBigs The total number of SNMP Protocol Data Units (PDUs), which were generated by the
SNMP protocol entity and for which the value of the error-status field is too big.
snmpInGetRequest The total number of SNMP Get-Request Protocol Data Units (PDUs), which have been
accepted and processed by the SNMP protocol entity.
snmpOutGetRequests The total number of SNMP Get-Request Protocol Data Units (PDUs), which have been
generated by the SNMP protocol entity.
snmpInNoSuchNames The total number of SNMP Protocol Data Units (PDUs) that were delivered to the SNMP
protocol entity and for which the value of the error-status field is
noSuchName.
snmpOutNoSuchNames The total number of SNMP Protocol Data Units (PDUs), which were generated by the
SNMP protocol entity and for which the value of the error-status is
noSuchName.
snmpInGetNexts The total number of SNMP Get-Next Protocol Data Units (PDUs), which have been
accepted and processed by the SNMP protocol entity.
snmpOutGetNexts The total number of SNMP Get-Next Protocol Data Units (PDUs), which have been
generated by the SNMP protocol entity.
snmpInBadValues The total number of SNMP Protocol Data Units (PDUs) that were delivered to the SNMP
protocol entity and for which the value of the error-status field is
badValue.
snmpOutBadValues The total number of SNMP Protocol Data Units (PDUs), which were generated by the
SNMP protocol entity and for which the value of the error-status field is
badValue.
snmpInSetRequests The total number of SNMP Set-Request Protocol Data Units (PDUs), which have been
accepted and processed by the SNMP protocol entity.
snmpOutSetRequests The total number of SNMP Set-Request Protocol Data Units (PDUs), which have been
generated by the SNMP protocol entity.

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English