Switch Memory and Configuration
Automatic Configuration Update with DHCP Option 66
Xmodem: Copying a Configuration from a Serially
Connected Host
Syntax: copy xmodem config < dest-file > < pc | unix >
This is an addition to the copy xmodem command options. Use
this command to download a configuration file from an
Xmodem host to the switch.
For more on using Xmodem to copy a file from a serially
connected host, refer to “Xmodem: Copying a Configuration
File from a Serially Connected PC or UNIX Workstation” on
page A-26.
Operating Notes for Multiple Configuration Files
â– SFTP/SCP: The configuration files are available for sftp/scp transfer as
/cfg/< filename >.
Automatic Configuration Update with
DHCP Option 66
ProCurve switches are initially booted up with the factory-shipped configura-
tion file. This feature provides a way to automatically download a different
configuration file from a TFTP server using DHCP Option 66. The prerequisites
for this to function correctly are:
â– One or more DHCP servers with Option 66 are enabled
â– One or more TFTP servers has the desired configuration file.
Caution This feature must use configuration files generated on the switch to function
correctly. If you use configuration files that were not generated on the switch,
and then enable this feature, the switch may reboot continuously.
6-37
To Next Page
Loading...
Need help?
General