HP PROCURVE 2520 User Manual

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Status and Counters - Port Counters
Port
-----
Total Bytes
--------------
Total Frames Errors Rx
-------------- ------------
Drops Rx
------------
Flow
Ctrl
-----
Bca*
Lim*
---*
1
2
3
4
5
6
7
8
9
10
1,121,436,946
0
0
0
0
0
1,078,679,873
0
0
0
10,610,556 0
0 0
0 0
0 0
0 0
0 0
10,528,968 0
0 0
0 0
0 0
0
0
0
0
0
0
0
0
0
0
off
off
off
off
off
off
off
off
off
off
0
0
0
0
0
0
0
0
0
0
Actions-> Back Show details Reset Help
Return to previous screen.
Use up/down arrow keys to scroll to other entries, left/right arrow keys to
change action selection, and <Enter> to execute action.
Figure 10-5. Example of show int display Command with Dynamically Updating Output
Customizing the Show Interfaces Command
You can create show commands displaying the information that you want to
see in any order you want by using the custom option.
Syntax: show interfaces custom [port-list] column-list
Select the information that you want to display. Parameters
include:
■ port name
■ type
■ vlan
■ intrusion
■ enabled
■ status
■ speed
■ mdi
■ flow
Columns supported are:
10-11

HP PROCURVE 2520 Specifications

General

Web Interface	Yes
CLI Support	Yes
IPv6 Support	Yes
Auto-MDIX	Yes
SNMP Support	Yes
Quality of Service (QoS)	Yes
VLAN Support	Yes
Jumbo Frame Support	Yes