Troubleshooting
Viewing Switch Configuration and Operation
Figure C-19 shows sample output from the show tech command.
ProCurve# show tech
show system
Status and Counters - General System Information
System Name
System Contact
System Location
: ProCurve
:
:
MAC Age Time (sec) : 300
Time Zone : 0
Daylight Time Rule : None
Software revision
ROM Version
: S.14.XX
: S.12.12
Base MAC Addr
Serial Number
: 001871-c42f00
: SG641SU00L
Up Time
CPU Util (%)
: 23 hours
: 10
Memory - Total
Free
:
:
IP Mgmt - Pkts Rx : 759
Pkts Tx : 2
Packet
Buffers
- Total
Free
Lowest
Missed
: 6750
: 5086
: 4961
: 0
show flash
Image
-----
Size(Bytes)
----------
Date Version
-------- -------
Build #
-------
Figure C-19. Example of Show Tech Command
Saving show tech Command Output to a Text File
When you enter the show tech command, a summary of switch operational
data is sent to your terminal emulator. You can use your terminal emulator’s
text capture features to save the show tech data to a text file for viewing,
printing, or sending to an associate to diagnose a problem.
For example, if your terminal emulator is the Hyperterminal application
available with Microsoft® Windows® software, you can copy the show tech
output to a file and then use either Microsoft Word or Notepad to display the
data. (In this case, Microsoft Word provides the data in an easier-to-read
format.)
C-60
To Next Page
Loading...
Need help?
General
