HP PROCURVE 2520

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
ProCurve(config)# int 5-6 flow-control
ProCurve(config)# show int brief
Status and Counters - Port Status
| Intrusion MDI Flow Bcast
Port Type | Alert Enabled Status Mode Mode Ctrl Limit
----- --------- + --------- ------- ------ ---------- ----- ----- ------
1 10/100TX | No Yes Up 100FDx MDI off 0
2 10/100TX | No Yes Down 10FDx MDIX off 0
3 10/100TX | No Yes Down 10FDx MDI off 0
4 10/100TX | No Yes Down 10FDx MDIX off 0
5 10/100TX | No Yes Up 10FDx MDI on 0
6 10/100TX | No Yes Up 10FDx MDI on 0
7 10/100TX | No Yes Up 100FDx MDI off 0
8 10/100TX | No Yes Down 10FDx MDIX off 0
9 100/1000T | No Yes Down 1000FDx MDI off 0
10 100/1000T | No Yes Down 1000FDx MDI off 0
Figure 10-10. Example of Configuring Flow Control for Ports
ProCurve(config)# no int 5-6 flow-control
ProCurve(config)# show int brief
Status and Counters - Port Status
| Intrusion MDI Flow Bcast
Port Type | Alert Enabled Status Mode Mode Ctrl Limit
----- --------- + --------- ------- ------ ---------- ----- ----- ------
1 10/100TX | No Yes Up 100FDx MDI off 0
2 10/100TX | No Yes Down 10FDx MDIX off 0
3 10/100TX | No Yes Down 10FDx MDI off 0
4 10/100TX | No Yes Down 10FDx MDIX off 0
5 10/100TX | No Yes Up 10FDx MDI off 0
6 10/100TX | No Yes Up 10FDx MDI off 0
7 10/100TX | No Yes Up 100FDx MDI off 0
8 10/100TX | No Yes Down 10FDx MDIX off 0
9 100/1000T | No Yes Down 1000FDx MDI off 0
10 100/1000T | No Yes Down 1000FDx MDI off 0
Figure 10-11. Example Continued from Figure 10-10
10-18