Troubleshooting
Viewing Switch Configuration and Operation
ProCurve(config)# show run | exclude ipv6
Running configuration:
; J9146A Configuration Editor; Created on release #W.14.06
hostname "ProCurve Switch"
module 1 type J8702A
module 2 type J8705A
snmp-server community "notpublic" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged A1-A24,B1-B20
Displays all lines that don’t contain “ipv6”.
ip address dhcp-bootp
no untagged B21-B24
exit
vlan 20
name "VLAN20"
untagged B21-B24
no ip address
exit
policy qos "michael"
exit
sequence 10 deny tcp 2001:db8:255::/48 2001:db8:125::/48
exit
no autorun
password manager
ProCurve(config)#
Figure C-23. Example of Pattern Matching with Exclude Option
C-64
To Next Page
Loading...
