Time Protocols
SNTP: Viewing, Selecting, and Configuring
If include-credentials is configured, the SNTP authentication configuration is
saved in the configuration file. When the show config command is entered, all
of the information that has been configured for SNTP authentication displays,
including the key-values.
ProCurve(config)# show config
Startup configuration:
.
Include-credentials is configured.
.
.
include-credentials
All of the SNTP authentication
timesync sntp
information displays in the
sntp broadcast
configuration file, including the key-
values.
sntp 50
sntp authentication
snt
p authentication key-id 55 authentication-mode md5 key-value “secretkey1”
trusted
sntp authentication key-id 2 authentication-mode md5 key-value “secretkey2”
sntp server priority 1 10.10.10.2 3 key-id 55
sntp server priority 2 fe80::200:24ff:fec8:4ca8 4 key-id 55
sntp server priority 3 10.10.4.60 3
.
.
.
To Next Page
Loading...
Need help?
General