HP ProCurve 6120G/XG

File Transfers
Contents
Transferring Switch Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . A-26
Xmodem: Copying a Configuration File to a USB Serial
Xmodem: Copying a Configuration File from a Serially
TFTP: Copying a Configuration File to a Remote Host . . . . . . . A-26
TFTP: Copying a Configuration File from a Remote Host . . . . A-27
TFTP: Copying a Customized Command File to a Switch . . . . A-27
Console Connected PC or UNIX Workstation . . . . . . . . . . . . . . A-28
Connected PC or UNIX Workstation . . . . . . . . . . . . . . . . . . . . . . A-29
Copying Diagnostic Data to a Remote
Host, USB Device, PC or UNIX Workstation . . . . . . . . . . . . . . . . . . . A-30
Copying Command Output to a Destination Device . . . . . . . . . A-31
Copying Event Log Output to a Destination Device . . . . . . . . . A-31
Copying Crash Data Content to a Destination Device . . . . . . . A-32
Copying Crash Log Data Content to a Destination Device . . . . A-33
A-2