Network Out-of-Band Management (OOBM)
Tasks
Tasks
OOBM Configuration
OOBM context
OOBM configuration commands can be issued from the global configuration
context (config) or from a specific OOBM configuration context (oobm). To
enter the OOBM configuration context from the general configuration con-
text, use the oobm command.
Syntax: oobm
Enters the OOBM context from the general configuration
context.
For example:
ProCurve (config)# oobm
ProCurve (oobm)#
G-7
To Next Page
Loading...
Need help?
General