HP ProCurve 6120G/XG

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Syntax: show interfaces custom [port-list] column-list
Select the information that you want to display. Parameters
include:
■ port name
■ type
■ vlan
■ intrusion
■ enabled
■ status
■ speed
■ mdi
■ flow
Columns supported are:
Parameter Column Displays Examples
port Port identifier A2
type Port type 100/1000T
status Port status up or down
speed Connection speed and duplex 1000FDX
mode Configured mode auto, auto-100, 100FDX
mdi MDI mode auto, MDIX
flow Flow control on or off
name Friendly port name
vlanid The vlan id this port belongs to, 4
or “tagged” if it belongs to more
tagged
than one vlan
enabled port is or is not enabled yes or no
intrusion
intrusion Intrusion alert status no
bcast Broadcast limit 0
10-11