HP StorageWorks MSL2024 User Manual

6. Serial port (Factory use only)5. Ethernet port
8. Magazine release hole7. USB port
10. Tape drive LED
9. Pull-out tab containing the serial number and other
product information
11. Tape drive Ethernet port (LTO-5 only)
The device requires a 110/220 volt AC power connection.
Tape drive LED
Each tape drive has a green LED, which indicates that the tape drive is powered on (see Figure 13).
Figure 13 Tape drive LED
.
1. Tape drive LED
Power supply back panel (MSL4048, MSL8084, and
MSL8096)
Figure 14 Power supply LEDs
.
AC power is connected.1. Blue
Fan failure. The fan is running too slow or is defective.2. Yellow
The power supply is producing good power for the Library.3. Green
Features and overview36

HP StorageWorks MSL2024 Specifications

General

Number of Slots	24
Number of Drives	1 or 2
Tape Technology	LTO Ultrium
Drive Bays	1 or 2
Interface	SCSI, SAS
Drive Type	LTO-3, LTO-4
Supported Drives	LTO-3, LTO-4
Operating System Support	Windows, Linux, HP-UX, Solaris, AIX
Dimensions	8.9 x 48.0 x 44.8 cm