210
The following example configures the ACS address as http://169.254.76.31:7547/acs, username as
1234, and password as 5678:
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] option 43 hex
0127687474703A2F2F3136392E3235342E37362E33313A373534372F61637320313233342035363738
Table 24 Hexadecimal forms of the ACS attributes
Attribute Attribute value Hexadecimal form
Length 39 characters 27
ACS URL http://169.254.76.31/acs
687474703A2F2F3136392E3235342E37362E33313A3735
34372F61637320
NOTE:
The two ending digits (20) represent the space.
ACS connect
username
1234
3132333420
NOTE:
The two ending digits (20) represent the space.
ACS connect
password
5678 35363738
For more information about DHCP and DHCP Option 43, see layer 3—IP Services Configuration
Guide.
Configuring the preferred ACS attributes from the CLI
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter CWMP view.
cwmp
N/A
3. Configure the preferred ACS
URL.
cwmp acs url
url
By default, no preferred ACS URL
has been configured.
4. Configure the username for
authentication to the
preferred ACS URL.
cwmp acs username
username
By default, no username has
been configured for
authentication to the preferred
ACS URL.
5. (Optional.) Configure the
password for authentication
to the preferred ACS URL.
cwmp acs password
{
cipher
|
simple
} password
By default, no password has been
configured for authentication to
the preferred ACS URL.
Configuring the default ACS attributes from the CLI
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter CWMP view.
cwmp
N/A
3. Configure the default ACS
URL.
cwmp acs default url
url
By default, no default ACS URL
has been configured.
4. Configure the username for
authentication to the default
ACS URL.
cwmp acs default username
username
By default, no username has been
configured for authentication to
the default ACS URL.
To Next Page
Loading...
Need help?
General
