229
packets. NETCONF over SOAP over
HTTP packets:
netconf soap http dscp
dscp-value
• Set the DSCP value for
NETCONF over SOAP over
HTTPS packets:
netconf soap https dscp
dscp-value
packets.
Enabling NETCONF over SSH
This feature allows users to use a client to perform NETCONF operations on the device through a
NETCONF over SSH connection.
To enable NETCONF over SSH:
Step Command Remark
1. Enter system view.
system-view
N/A
(4) Enable NETCONF over
SSH.
netconf ssh server enable
By default, NETCONF over SSH
is disabled.
(5) Specify a port to listen for
NETCONF over SSH
connections.
netconf ssh server port
port
number
By default, port 830 listens for
NETCONF over SSH
connections.
Enabling NETCONF logging
NETCONF logging generates logs for different NETCONF operation sources and NETCONF
operations.
To enable NETCONF logging:
Step Command Remarks
1. Enter system view.
system-view
N/A
(6) Enable NETCONF logging.
netconf log source
{
all
|
{
agent
|
soap
|
web
} * }
{ {
protocol-operation
{
all
|
{
action
|
config
|
get
|
set
|
session
|
syntax
|
others
} * } } |
verbose
}
By default, NETCONF logging
is disabled.
Establishing a NETCONF session
A client must send a hello message to a device to finish capabilities exchange before the device
processes other requests from the client.
The device supports a maximum of 32 NETCONF sessions. If the upper limit is reached, new
NETCONF users cannot access the device.
To Next Page
Loading...
Need help?
General
