10. CAUTION:CAUTION:
To prevent mechanical damage or depositing oil on your hands or other contaminant to the heatsink contact surface,
hold the heatsink only by the edge of its base plate. Do not touch the heatsink fins.
Lift the processor-heatsink module straight up from the system board.
11. Place the processor-heatsink module on a flat work surface with its contact side facing up.
12. CAUTION:CAUTION: Do not press down on the dust cover. Pressing down on the dust cover might damage the processor socket.
If you are not immediately installing the replacement processor-heatsink module, install the dust cover on the empty processor socket:
a. Press and hold the grip tabs on the dust cover (callout 1).
b. Carefully lower the dust cover onto the bolster plate guide posts (callout 2).
Make sure that the corner holes of the dust cover are properly engaged with the guide posts on the bolster plate.
To Next Page
Loading...
