Figure 3-6 Drill Template Type I
Step 2 Drill one cable hole according to the drill template. Skip this step if you want to route the cables
through the side of the junction box.
Step 3 Fix the junction box to the wall with the expansion screws.
Figure 3-7 Install the Junction Box
Step 4 Route the cables of the camera.
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
3 Camera Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
To Next Page
Loading...
