No. Description
9 Video Out
10 Grounding
11 Alarm Out
12 RS-232
13 RS-485
14 Alarm In
15 Audio Out
16 ABF
17 Audio In
NOTE
l Press RESET before the camera is powering on and hold it for 10 seconds when powering-on to restore
the default settings.
l The type of auto-iris interface is shown as below figure:
Figure 3-27 Auto-iris Interface
Table 3-5 Pins
NO. DC-drive
1 Damp-
2 Damp+
3 Drive+
4 Drive-
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
3 Camera Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
To Next Page
