Step 6 Adjust the Lens
1. Connect the VIDEO OUT interface of the camera to the debugging monitor.
2. Adjust the Zoom Lever and Focus Level to obtain a perfect image on the monitor.
Figure 3-30 Install the Camera and Adjust the Lens
Step 7 Insert the SD card to the SD card slot to get it installed.
Step 8 Push the inserted SD card slightly to get it sprung by its built-in springing to remove it.
Figure 3-31 Install the SD Card
----End
IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
User Guide
3 Camera Installation
Issue 02 (2014-12-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
24
To Next Page
Loading...
