Item Value
Center wavelength [nm] 1271nm,1291nm,1311nm,1331nm
Maximum Tx optical power (AVG)
[dBm]
2.3 dBm
Minimum Tx optical power (OMA)
[dBm]
-7.0 dBm
Minimum extinction ratio [dB] 3.5 dB
Receiver Optical Characteristics
Rx sensitivity (OMA) [dBm] -10.5 dBm
Overload power (AVG) [dBm] 3.5 dBm
NOTE
Application limitations:
- In actual applications, the number of conversion connectors for the optical ber link
cannot exceed 4.
- This module is sensitive to
ber link contamination. During deployment, ensure that the
ber endface meets the ber application standard. For details, see the single-mode
connector requirements under the ceramic ferrule endface requirements of bers in section
"Cable -Optical Jumper."
3.4.17 50Gbps QSFP28 Optical Module
3.4.17.1 50Gbps-QSFP28-SMF-1311nm-10km-commercial
Table 3-202 50Gbps-QSFP28-SMF-1311nm-10km-commercial
specications
Item
Value
Basic Information
Module name 50Gbps-QSFP28-SMF-1311nm-10km-
commercial
Part Number 02311YNR
Model OSL010N01
Form factor QSFP28
Application standard IEEE 802.3cd, 50GBASE-LR
Connector type LC
Optical ber type SMF
Bit error ratio (BER) <1x10E-12
HUAWEI NetEngine 8000 F
Hardware Guide 3 Hardware Description
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 261
To Next Page
Loading...
Need help?
General
