Huawei NetEngine 8000 F

Accessory Quantity Description Part Number
Panel
screw
(M6x12)
6 Used to x expandable guide
rails and the device.
26020141
Floating
nut (M6)
6 Installed on mounting rails of a
cabinet or rack and used with
M6 screws to secure the
expandable guide rails and the
device in the cabinet or rack.
26020075
Fiber
binding
tape
2 m Used to bundle optical bers. 21101258
Cable tie
(300 x 3.6
mm)
100 Used to bundle cables. 21100144
Label
cable tie
12 Used to bundle cables and
attach the power cable label
(29041061) to the cables.
21200708
Signal
cable
label
9 Used to identify locations of
signal cables.
29041060
Power
cable
label
1 Used to identify locations of
power cables.
29041061
4.2.4.5 Inspecting and Cleaning Optical Fiber Connectors and Adapters
4.2.4.5.1 Overview
This topic introduces the purpose and procedure of cleaning optical
ber
connectors, as well as polluters to optical ber connectors.
Cleaning ber connectors is to remove dust or other dirt to avoid performance
degradation of optical transmission systems.
Figure 4-233 shows an optical
ber connector.
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 585