Huawei NetEngine 8000 F - PDC2 K2 S54-CB (DC Power Module,Pdc2 K2 S54-CB,2200 W DC Power Module(Back to Front, Power Panel Side Exhaust))

Item Specication
Rated input voltage [V] 100 V to 240 V AC, supporting 240 V
HVDC
AC: 100 V to 130 V dual-live wire/200
V to 240 V
HVDC: 240 V
Input voltage range [V] 90 V to 290 V AC
Maximum input current [A] 16 A
Rated output voltage [V] 53.5 V
Rated output current [A] 56 A (input: 200 V AC to 290 V AC/200
VDC to 290 V DC)
52 A (input: 176 V AC to 200 V AC/190
VDC to 200 V DC)
Rated output power [W] 3000 W (input: 200 V AC to 290 V AC/
200V DC to 290 V DC)
2800 W (input: 176 V AC to 200 V AC/
190V DC to 200 V DC)
Power supply eciency 0.9
Power dissipation Mode Built-in fan
Type of power cables C19 cable
3.2.3.3 PDC2K2S54-CB (DC Power Module,PDC2K2S54-CB,2200W DC Power
Module(Back to Front , Power panel side exhaust))
Overview
Table 3-64 Basic information about the PDC2K2S54-CB
Item
Details
Description DC Power Module,PDC2K2S54-CB,
2200W DC Power Module(Back to
Front , Power panel side exhaust)
Part Number 02312YCP
Model PDC2K2S54-CB
HUAWEI NetEngine 8000 F
Hardware Guide 3 Hardware Description
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 82