Huawei NetEngine 8000 F - Power; Power Supply System

Item Specication
FlexE supported Yes
Physical ports 20, 8, 9, and 12 can be
added to the same group. port-id
ranges from 1000 to 3000. A
maximum of 36 FlexE clients can be
created.
Physical ports 21, 10, 11, and 14 can
be added to the same group. port-id
ranges from 1000 to 3000. A
maximum of 36 FlexE clients can be
created.
Physical ports 22, 13, 16, and 17 can
be added to the same group. port-id
ranges from 1000 to 3000. A
maximum of 36 FlexE clients can be
created.
Physical ports 23, 15, 18, and 19 can
be added to the same group. port-id
ranges from 1000 to 3000. A
maximum of 36 FlexE clients can be
created.
Physical ports 24, 28, and 29 can be
added to the same group. port-id
ranges from 1000 to 3000. A
maximum of 36 FlexE clients can be
created.
Physical ports 25, 30, 31 can be added
to the same group. port-id ranges from
1000 to 3000. A maximum of 36 FlexE
clients can be created.
3.2 Power
3.2.1 Power Supply System
The system supports DC and AC power supply in 1+1 backup mode.
The power supply system provides the fault monitoring and alarming function.
The two power modules work in 1+1 backup mode. The two power supply
channels in backup mode are converted by two independent power supply
modules and then provided for Control board and fans.
HUAWEI NetEngine 8000 F
Hardware Guide 3 Hardware Description
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 55