Huawei NetEngine 8000 F

Step 4 Secure the cabinet and measure the impedance again.
----End
Installing Supporting Brackets on the Stand
Procedure
Step 1 Attach supporting brackets at the front and rear of the stand with M12x25 bolts,
as shown in Figure 4-212.
Figure 4-212 Installing supporting brackets
NO TE
Perform this step only in scenarios where a single cabinet is to be installed.
----End
4.2.2.3.2 Installing Cabinets on a Concrete Floor
Perspective View After Installation
Figure 4-213 shows the perspective view of a single cabinet installed on a
concrete
oor.
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 552