Huawei NetEngine 8000 F User Manual

4.2.4.5.2 Protection of Optical Fiber Connectors
This topic describes requirements for ber connector protection.
The requirements are as follows:
● All boards with optical ports must be packed properly, to avoid mechanical
and electrostatic damages and to reduce vibrations.
● The protective caps must be put in an ESD bag.
● Protective caps must be installed on all optical
ber connectors when not in
use. The optical ber connectors must be stored in proper packages to keep
them clean.
● Figure 4-234 shows the recommended protective caps, whereas Figure 4-235
shows the protective caps not recommended.
Figure 4-234 Protective caps recommended
Figure 4-235 Protective caps not recommended
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 587

Huawei NetEngine 8000 F Specifications

General

Brand	Huawei
Model	NetEngine 8000 F
Category	Network Router
Language	English