Huawei NetEngine 8000 F

Item Value
Center frequency deviation [GHz] ±1.8 GHz
Tx channel tuning time [s] 180s
Output optical power in case of laser
shutdown [dBm]
≤-20 dBm
Receiver Optical Characteristics
Rx operating wavelength range [nm] 1528.773nm~1567.133nm
Rx sensitivity (OMA) [dBm] -
Overload power (AVG) [dBm] 0 dBm
Overload power (OMA) [dBm] -
FEC mode CFEC
RS-FEC
Rx optical power range [dBm] -12 dBm ~ 0 dBm
Minimum OSNR (back-to-back&EOL)
[dB]
26 dB
CD tolerance [ps/nm] 0 ps/nm ~ 2400 ps/nm
PMD tolerance [ps] 10 ps@0.5 dB OSNR penalty
PDL tolerance [dB] 3.5 with ≤ 1.3 dB OSNR penalty
SOP tolerance [krad/s] 50 krad/s@0.3dB penalty
NOTE
Only the single-span application is supported. This optical module needs to be used with
the ber amplier module.
When this type of optical module is used to interconnect with WDM equipment, the WDM
client-side 1+1 protection switching time is greater than 50 ms.
3.4.20.4 400Gbps(4*100Gb/s PAM4)-QSFP-DD-SMF-1310nm-2km-commercial
Table 3-220 400Gbps(4*100Gb/s PAM4)-QSFP-DD-SMF-1310nm-2km-commercial
specications
Item
Value
Basic Information
Module name 400Gbps(4*100Gb/s PAM4)-QSFP-DD-
SMF-1310nm-2km-commercial
Part Number 02313KLT
Model OSK002N01
HUAWEI NetEngine 8000 F
Hardware Guide 3 Hardware Description
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 291