Huawei NetEngine 8000 F User Manual

Item Specication
Rated output power [W] DC:2200W
AC:3000W(input : 200Vac-290Vac/
200Vdc-290Vdc)
2800W(input : 176Vac-200Vac/
190Vdc-200Vdc)
Front-end circuit breaker/fuse [A] DC : >=50
AC : >=16
Heat dissipation mode Air cooling
Airow direction Back to front: port-side air exhaust
Noise at normal temperature (acoustic
power) [dB(A)]
< 78 dBA
Number of slots 6
Number of service board slots 1
Switching capacity 13.6 Tbit/s
Redundant power supply 1+1
Redundant fans 2+1, normal operation in a short term
when a single fan module fails at the
ambient temperature of 40°C (104°F)
Long-term operating temperature
[°C(°F)]
Port-side air exhaust: 0°C to 40°C
(32°F to 104°F)
Restriction on the operating
temperature variation rate [°C(°F)]
≤ 30°C/hour (54°F/hour)
Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity
[RH]
5% to 90% RH, non-condensing
Short-term operating relative humidity
[RH]
5% to 95% RH, non-condensing
Storage relative humidity [RH] 5% to 95% RH, non-condensing
Long-term operating altitude [m(ft.)] < 4000 m (< 13123.4 ft.)
Storage altitude [m(ft.)] < 5000 m (< 16404.2 ft.)
Breakout supported Supported
Interface rate auto-sensing supported Supported
HUAWEI NetEngine 8000 F
Hardware Guide 3 Hardware Description
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 54

Huawei NetEngine 8000 F Specifications

General

Brand	Huawei
Model	NetEngine 8000 F
Category	Network Router
Language	English