If no special requirements are imposed on power cables, power cables are
delivered according to default congurations. Otherwise, power cables need to be
purchased locally.
Overview
An AC power cable is used to connect to the AC power module of a device to
supply power to the device.
Cables must be in compliance with standards of the destination country or region. The
actual cable type depends on the requirements of the target country or customer.
Appearance
Figure 3-54 Connector C13 (PDU)
Figure 3-55 Connector C13 (wall-mounted)
HUAWEI NetEngine 8000 F
Hardware Guide 3 Hardware Description
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 306
To Next Page
Loading...
