When tightening oating nuts, ensure a minimum distance of 75 mm between a
chassis side and its adjacent column for ventilation.
5. Use a torque screwdriver to install the front mounting brackets using three
M4 screws with a torque of 1.2 N m.
6. Use a torque screwdriver to install the extension rails of the expandable
mounting brackets on the rear of the chassis using four M4 screws with a
torque of 1.2 N m.
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 410
To Next Page
Loading...
