Huawei NetEngine 8000 F User Manual

Installation Personnel Requirement
Installation and maintenance personnel must be trained to perform operations
correctly and safely.
Personnel Safety
● A high-voltage power supply provides power for device operations. Direct
human contact with the high voltage power supply or human contact through
damp objects can be fatal.
●
Unspecied or unauthorized high voltage operations could result in re or
electric shock, or both.
● Ground a device before powering it on; otherwise, the human body and the
device are exposed to danger.
● Before performing operations on the power supply facilities, power
o these
facilities.
● Do not look into the optical port without eye protection when handling
optical
bers.
● To protect human respiratory organs and human eyes from dust, take
protective measures when drilling holes.
● When working at heights, prevent objects from falling down.
Device Security
● Keep an unpacked device upright and handle it with care when carrying it or
installing it into a cabinet.
● Use a ladder to lay out cables. Do not trample on a device.
● Wear an ESD wrist strap or ESD gloves when handling circuit boards.
Otherwise, the static electricity discharged from the human body may
damage the electrostatic sensitive components, such as large-scale integrated
circuits (LSIs) on the circuit board.
● Before operating the device, check the electrical connection of the device, and
ensure that the device is properly grounded.
Condensation Prevention
● Before installing the equipment, ensure that no condensation is on the
equipment. Otherwise, the equipment may fail to be powered on.
● If the indoor and outdoor temperature
dierence is 15°C or more, wait eight
hours after moving devices to the equipment and then install them.
● Generally, when the outdoor humidity is greater than 80% and the indoor and
outdoor temperature
dierence is greater than 5°C, condensation forms. In
highly humid weather, before installing a device or board, you are advised to
remove the package inside an equipment room and check whether
condensation forms as follows: Touch the surface of the device or board with
dry
ngers or ESD gloves to check whether water marks exist. If they do,
condensation forms, and the device or board must be kept in the equipment
room for 8 hours before being powered on.
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 520

Huawei NetEngine 8000 F Specifications

General

Brand	Huawei
Model	NetEngine 8000 F
Category	Network Router
Language	English