Huawei NetEngine 8000 F

8. The cabinet has a cable outlet on the top or at the bottom for overhead or
underoor cabling.
CA UTION
1. The device supports front-to-rear and rear-to-front heat dissipation modes.
To ensure smooth and
ecient heat dissipation, check the airow direction
of the equipment room where the device is to be installed, and ensure that
cold air
ows into the device from the air intake vent and leaves from the
air exhaust vent.
2. Note that the device adopts the air-cooling heat dissipation mode. To
implement
ecient heat dissipation, make sure that the air intake and
exhaust vents are not blocked.
HUAWEI NetEngine 8000 F
Hardware Guide 4 Hardware Installation and Parts Replacement
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 578