Huawei NetEngine 8000 F - Page 62

Item Specication
Maximum number of power chassis
inputs
2
Rated input voltage [V] DC: –48 V to –60 V
AC: 100 V to 130 V (dual-live
wire)/200 V to 240 V
HVDC: 190 V–240 V
Input voltage range [V] DC: –40 V to –72 V
AC: 90 V–290 V
HVDC: 190 V–290 V
Maximum input current [A] DC: 50A
AC/HVDC: 16A
Rated output power [W] DC: 2200 W
AC: 3000 W (input : 200 VAC–290
VAC/200 VDC–290 VDC)
2800 W (input : 176 VAC–200 VAC/190
VDC–200 VDC)
Front-end circuit breaker/fuse [A] DC : >=50
AC : >=16
Heat dissipation mode Air cooling
Airow direction Front to back: port-side air intake
Noise at normal temperature (acoustic
power) [dB(A)]
< 78 dBA
Number of slots 6
Number of service board slots 1
Switching capacity 13.6 Tbit/s
Redundant power supply 1+1
Redundant fans 2+1, normal operation in a short term
when a single fan module fails at the
ambient temperature of 40°C (104°F)
Long-term operating temperature
[°C(°F)]
Port-side air intake: –5°C to +45°C
(23°F to 113°F)
Restriction on the operating
temperature variation rate [°C(°F)]
≤ 30°C/hour (54°F/hour)
Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity
[RH]
5% to 90% RH, non-condensing
HUAWEI NetEngine 8000 F
Hardware Guide 3 Hardware Description
Issue 05 (2023-03-31) Copyright © Huawei Technologies Co., Ltd. 51