OWNER INFORMATION
Model Number ____________________________________________________________________
Software Version Number ___________________________________________________________
Serial Number ____________________________________________________________________
Date Installed _____________________________________________________________________
Service and Parts Representative _____________________________________________________
Phone Number____________________________________________________________________
Sales Representative_______________________________________________________________
Phone Number____________________________________________________________________
Concept and Procedure Training Checklist
Trained
Declined
Safety Precautions
Quick-Thread
Autostart
Servo-Stop
Maintenance & Calibration
Cleaning, Lubrication, and Maintenance of Adaptors, Hub, and Shaft
Calibrating the Balancer
Calibrating the Load Roller and Dataset Arms
Calibrating the Inflation Station
Mounting the Wheel/Tire Assembly
Verifying Mounting Repeatability with Centering Check® Feature
Cone Mounting
Pressure Ring and Spacers
Flange Plate and Cone Mounting
Wheel Balancing
SmartWeight™
Standard
Mixed Weights
Adhesive Weights with Auto Dataset Arms
Split-Spoke
Patch Balancing with Auto Dataset Arms (optional)
Do’s and Don’ts of Wheel Balancing
Road Force Measurement and ForceMatching™
Adjusting P/SUV/LT Limits
Assembly Measurements
Applying Previous Wheel Measurements
Applying Previous Tire Measurements
Wheel Measurement with Dataset Arms
Tire Installed
Bare Rim
Road Force Measurement First Harmonic Diagnosis Screen
“Current Runout and Force Variation”
“Diagnosis Explanation” and “Details” Screens
Match Codes
MatchMaker Procedure Explained
Do’s and Don’ts of Road Force Measurement
To Next Page
Loading...
