GSP9700 Series Road Force Measurement System Operation 4. Balancing a Wheel 59
The “Set Dimensions” view is displayed in reduced size in the lower left-hand corner.
It can be enlarged by pressing “Set Dimensions” or will automatically enlarge if a
Dataset
®
Arm is moved from home position and triggered to take rim data.
“BALANCE VIEW”
The “Set Dimensions” view enlarges the dimensional diagram of the wheel assembly.
The inch/millimeter selection softkeys are available in this view on the first row menu.
The control knob(s) can be used to manually enter the rim dimensions. The “Apply
Weights” view is displayed in reduced size in the lower left-hand corner. It can be
enlarged by pressing “Apply Weights,” or will automatically enlarge if the wheel is
spun or if both Dataset
®
arms are in the home position after one or both arms have
been triggered to take rim data.
“SET DIMENSIONS VIEW”
To Next Page
Loading...
