Husky Unify - Documentation; Manuals

For information about integrating non-Husky auxiliary equipment, contact your nearest Husky
Regional Service and Sales oce.
1.5 Documentation
A full set of manuals, drawings, schematics, certicates and other documentation are available for
every Husky hot runner.
The following describes the documentation provided with each system, along with common
conventions all readers should be familiar with.
IMPORTANT!
Keep all manuals in a convenient location for future reference.
1.5.1 Manuals
Husky manuals aid in the safe and proper use of Husky products. Where applicable, the manuals
provide instructions on installation, operation and maintenance.
Personnel should thoroughly review all manuals provided with their Husky equipment prior to
performing any tasks. Proceed with tasks only if all instructions are understood and always follow
applicable workplace safety requirements.
IMPORTANT!
Images in the manuals are for reference only and may not represent specic equipment details.
Refer to engineering drawings and schematics and the HMI for specic details.
The following manuals are provided with each Husky machine upon delivery:
Installation
Manual
Describes the basic installation of the manifold system.
Service Manual Describes the installation, startup, operation, shut down and maintenance of the
hot runner system.
NOTE:
Refer to the hot runner Service Manual for specic removal and maintenance
instructions.
These manuals are available online through www.husky.co.
v 2.2 — March 2021 Unify Manifold System
10 Documentation