Husky Unify - Safety Equipment; Material Safety Data Sheet (MSDS)

2.6.2 Safety Equipment
Use appropriate safety equipment when working on or near equipment.
Standard safety equipment includes:
• Exhaust Fan
For collecting potentially harmful plastic fumes
• Purging Container
For containing hot resin purged from the injection unit
• Vacuum Cleaner
For collecting spilled resin pellets and other debris that may create a falling hazard
• Stairs and Ladders
For ensuring safe access to areas of the machine
• Danger Signs
For warning other personnel to stand clear of a component or area of the machine
• Locks and Tags
For preventing the use of specic systems and components
• Fire Extinguishers
For the expedient suppression of small res
• Telescopic Mirror
For safely inspecting hot runner nozzle tips from outside the mold area
• Brass Hammers and Brass Rods
For safely removing dried resin deposits
2.7 Material Safety Data Sheet (MSDS)
WARNING!
Chemical hazard - Some of the chemicals used with Husky equipment are potentially
hazardous and could cause injury and illness. Before storing, handling, or working with any
chemical or hazardous material, thoroughly read and understand each applicable Material
Safety Data Sheet (MSDS), use recommended personal protective equipment and follow
the manufacturer’s instructions.
The Material Safety Data Sheet (MSDS) is a technical document which indicates the potential
health eects of a hazardous product. It contains safety guidelines to protect personnel, as well as
information about use, storage, handling, and emergency procedures.
Hot Runner Installation Manual v 2.2 — March 2021 Safety Summary
Personal Protective Equipment and Safety Equipment 25