Husky Unify - Rust Inhibitor Specifications; Torque Specifications

Type/
Description
Trade Name Part
Number
Quantity Used For
Static application
Grease
Kem-A-Trix
Fahrenheit 800
Bearing Gel
3936720 113 g (4 oz)
Squeeze Tube
Guide pins, alignment
dowels, screw heads
and threads, O-ring
seals
[2]
3936725 397 g (14 oz)
Grease Gun Tube
High temperature
Anti-seize
lubricant
Loctite Nickel Anti-
Seize 771
5541918 225 g (8 oz)
Can
Screws installed into
the manifold
Protective spray LPS 2 Lubricant 1501808 566 g (20 oz) Non-
Aerosol Spray Bottle
Hot runner plates
Thread-locking
uid
Loctite 248 5541916 9 g (0.32 oz)
Glue Stick
Screws that secure
the manifold
[2]
Apply only as directed. Refer to maintenance procedures and/or assembly drawings for more information.
3.10 Rust Inhibitor Specications
Any rust inhibitor used on the mold must meet the following specications:
Type Trade Name
Protective Spray LPS 2 Protective Spray
3.11 Torque Specications
Torque specications are provided on the assembly drawings.
CAUTION!
Mechanical hazard – risk of damage to the hot runner. Use of improper torque can result in
equipment damage. Always consult the assembly drawings for torque specications.
Hot Runner Installation Manual v 2.2 — March 2021 Specications
Recommended Lubricants 35