3.9 Recommended Lubricants
The following are recommended lubricants to be used during the assembly and maintenance of
Husky hot runners:
NOTE:
Husky recommends only the following lubricants and assumes no responsibility for lubricants not
specied. It is the customers responsibility when consulting with an alternate supplier to make
sure a suitable equivalent is used.
NOTE:
Lubricants of inferior quality can cause premature wear of components.
WARNING!
Chemical hazard - Some of the chemicals used with Husky equipment are potentially
hazardous and could cause injury and illness. Before storing, handling, or working with any
chemical or hazardous material, thoroughly read and understand each applicable Material
Safety Data Sheet (MSDS), use recommended personal protective equipment and follow
the manufacturer’s instructions.
CAUTION!
Contamination hazard – risk of contaminating lubricants or greases. Do not mix dierent
brands or grades of lubricants or greases. Mixing lubricants or greases can cause premature
breakdown of the lubricant or grease and could result in equipment damage.
WARNING!
Poison hazard – risk of death or serious injury. Some recommended lubricants may contain
toxic and/or non-ingestible additives and may not be Food and Drug Administration (FDA)
approved under the United States Department of Agriculture (USDA) rating H1 (formerly
AA). Consult with the lubricant manufacturer for specic details.
v 2.2 — March 2021 Unify Manifold System
34 Recommended Lubricants
To Next Page
Loading...
