IBM 6500 - Page 188

Error Markers:
v Enable (the default). Prints the following error markers for those elements that
print beyond the page boundaries:
>> for elements that begin off the right side of the page;
<< for elements that begin at the indicated position but end off the page
for elements where the starting position of the command contains an error
other than an off-page error.
v Disable. Does not print error markers for those elements that print beyond the
page boundaries.
Off
Page Errors:
v Disable (the default). Does not report errors for elements that start or end
beyond the right edge of the page.
v Enable. Reports errors for elements that start or end beyond the right edge of
the page.
Bar
Code Errors:
v Enable (the default). Prints an error message when invalid bar code data is
encountered.
v Disable. Does not print an error for invalid bar code data and the bar code will
be printed as is.
Character Filtering
Ignore Characters: Determines if character filtering is enabled, or if one or both
characters are ignored.
v Disable. (the default.) Does not ignore the characters selected with the select
character options.
v Character 1. The character selected using the Select Character 1 option will be
ignored in the data string.
v Character 2. The character selected using the Select Character 2 option will be
ignored in the data string.
v Character 1 and 2. Both characters selected using the Select Character 1 and
Select Character 2 options will be ignored in the data string.
174 Infoprint 6500 User’s Manual