Table 10. Fault Messages (continued)
Fault Message
Operator
Correctable? Explanation Solution
TESTING HARDWARE
PLEASE WAIT
N/A Status message when printer
runs self-tests and
initialization routines.
No action necessary.
TOP OF FORM SET N/A Non-error status message. No action necessary.
TRANSPORT CALIBRATION
COMPLETE
N/A Status message: displays
when Transport calibration is
complete.
No action required.
WAITING FOR ETHERNET
ADAPTER
N/A Status message: appears
when the printer is first
powered on if the optional
Ethernet card is installed.
No action required.
Chapter 6. Routine Service and Diagnostics 247
To Next Page
Loading...
