which is connected to a management station. The management station is then
connected out-of-band, via an Ethernet network, back to the second fibre channel
I/O path.
Note: Do not connect the DS4800 Storage Subsystem Ethernet ports to a public
network or public subnet. It is strongly recommended that you create a
private network between the DS4800 Storage Subsystem and the
management station.
Fibre channel connections
The storage subsystem fibre channel connection consists of up to four host
fibre-channel loops and a redundant drive fibre-channel loop. The host fibre-channel
loops provide the fibre path for host attachment. They can consist of fibre-channel
Table 30. Description of Figure 62
Number Description
1 Two DS4800s
2 Fibre channel I/O path
3 Host server
4 Ethernet network
5 Management station
Figure 65. Direct (out-of-band) managed storage subsystems
92 IBM System Storage DS4800 Storage Subsystem: Installation, User’s, and Maintenance Guide
To Next Page
Loading...
Need help?
General