IBM DS4800 - Interconnect-Battery Unit Needs Attention and Service Action Allowed Leds

5. Put on antistatic protection.
6. Unpack the interconnect-battery unit.
Save all packing materials in the event you need to return the new
interconnect-battery unit.
7. Unlatch both the top and bottom levers of the interconnect-battery unit and
rotate both levers straight out simultaneously to remove the failed
interconnect-battery unit. (Figure 96 on page 159 shows the
interconnect-battery unit sliding from the storage subsystem chassis.)
Service Action
Allowed LED (blue)
ds48049
Overall DS4800 Configuration
Needs Attention LED (amber)
Figure 95. Interconnect-battery unit Needs Attention and Service Action Allowed LEDs
158 IBM System Storage DS4800 Storage Subsystem: Installation, User’s, and Maintenance Guide