cabinet. If your cabinet contains components that you do not want to power off, turn
off all power switches on the components of the storage configuration you are
currently installing.
Statement 5:
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current
from the device, ensure that all power cords are disconnected from the power
source.
1
2
1. Verify that the main circuit breakers in the cabinet are turned off.
2. If you have not already done so, turn off all power switches on each storage
subsystem and storage expansion enclosure in the cabinet. Figure 70 on page
98 shows the locations of the power switches and connectors on the storage
subsystem.
Chapter 3. Cabling the storage subsystem 97
To Next Page
Loading...
Need help?
General