IBM SAN Volume Controller 2147-SV1 User Manual

Figure 93. Install the power supply
4. Close the handles on the PSU and ensure the handle lock clicks in to place.
5. Verify that the AC input and the DC power indicators are lit on the front of the PSU, as shown in Figure
94 on page 84.
Figure 94. Power supply indicators
84
SAN Volume Controller : Model 2145-SV1 Hardware Installation Guide

IBM SAN Volume Controller 2147-SV1 Specifications

General

Brand	IBM
Model	SAN Volume Controller 2147-SV1
Category	Server
Language	English