IBM SAN Volume Controller 2147-SV1 User Manual

Table 27. Physical specications (continued)
Environment Temperature Altitude Relative humidity
Maximum dew
point
Turned off (with
standby power)
5°C to 45°C
(41°F to 113°F)
0 m to 3,050 m
(0 ft to 10,000 ft)
8% to 85% 27°C (80.6°F)
Storing 1°C to 60°C
(33.8°F to
140.0°F)
0 m to 3,050 m
(0 ft to 10,000 ft)
5% to 80% 29°C (84.2°F)
Shipping -40°C to 60°C
(-40°F to 140.0°F)
0 m to 10,700 m
(0 ft to 34,991 ft)
5% to 100% 29°C (84.2°F)
Note: Decrease the maximum system temperature by 1°C for every 175 m increase in altitude.
Preparing your environment
The following tables list the physical characteristics of a SAN Volume Controller 2145-SV1 node.
Dimensions and weight
Use the parameters that are shown in Table 28 on page 148
to ensure that space is available in a rack
capable of supporting the node.
Table 28. Dimensions and weight
Height Width Depth Maximum weight
87 mm (3.4 in.) 447 mm (17.6 in) 746 mm (30.1 in) 25 kg (55 lb) to 30 kg
(65 lb) depending on
conguration
Additional space requirements
Ensure that space is available in the rack for the additional space requirements around the node, as
shown in Table 29 on page 148.
Table 29. Additional space requirements
Location Additional space requirements Reason
Left side and right side Minimum: 50 mm (2 in.) Cooling air flow
Back Minimum: 100 mm (4 in.)
If the cable-management arm is
used, allow 177 mm (7 in.)
Cable exit
Maximum heat output of each SAN Volume Controller 2145-SV1 node
The node dissipates the maximum heat output that is given in Table 30 on page 149.
148
SAN Volume Controller : Model 2145-SV1 Hardware Installation Guide

IBM SAN Volume Controller 2147-SV1 Specifications

General

Brand	IBM
Model	SAN Volume Controller 2147-SV1
Category	Server
Language	English