49. Tray containing expansion enclosure parts............................................................................................. 54
50. Packaging materials..................................................................................................................................55
51. Packaging for fascia.................................................................................................................................. 56
52. Releasing the 2145-92F cover ................................................................................................................ 57
53. Removing the 2145-92F cover.................................................................................................................57
54. Support rails..............................................................................................................................................58
55. Detaching the inner rail section................................................................................................................58
56. Screw locations to attach the inner rail to the enclosure........................................................................ 59
57. Attaching the inner rail section to the enclosure..................................................................................... 59
58. Installing the rail assembly to the rack frame..........................................................................................60
59. Example of the required rack space.........................................................................................................60
60. Example installation of the enclosure in the rack....................................................................................61
61. Replacing the 2145-92F enclosure in the rack........................................................................................62
62. Expansion canister....................................................................................................................................63
63. Install the expansion canister.................................................................................................................. 63
64. Upper and lower cable-management arms..............................................................................................64
65. Connectors for the upper cable management arm..................................................................................65
66. Components of the lower CMA assembly................................................................................................ 66
67. Upper and lower CMA assemblies moved aside......................................................................................67
68. Lower CMA assembly moved ...................................................................................................................67
69. Release the upper CMA assembly............................................................................................................68
70. Release the lower CMA assembly............................................................................................................ 68
71. Upper and lower cable-management arms..............................................................................................69
72. Upper and lower cable-management arms..............................................................................................69
73. Connectors for the cable management arm.............................................................................................70
ix