7914InstallSM01108.fm Draft Document for Review March 28, 2011 12:24 pm
150 IBM System Storage DS3500: Introduction and Implementation Guide
5. In this custom installation screen, we can select or deselect individual components. By
default, all components are be selected and you can deselect the component by entering
the number associated with that component you do not wish to install. Here we only
choose the DS Storage Manager 10 Client as shown in Example 5-4.
Example 5-4 Choose Product Features
Choose Product Features
-----------------------
ENTER A COMMA_SEPARATED LIST OF NUMBERS REPRESENTING THE FEATURES YOU WOULD
LIKE TO SELECT, OR DESELECT. TO VIEW A FEATURE'S DESCRIPTION, ENTER
'?<NUMBER>'. PRESS <RETURN> WHEN YOU ARE DONE:
1- [X] DS Storage Manager 10 Client
2- [ ] Support Monitor
3- [ ] DS Storage Manager 10 Utilities
4- [ ] DS Storage Manager 10 Agent
Choose the Features to be installed by this installer:
6. Confirm the pre-installation summary and press Enter as shown in Example 5-5.
Example 5-5 Storage Manager - Pre-installation summary
Pre-Installation Summary
------------------------
Review the Following Before Continuing:
Install Folder:
/opt/IBM_DS
Product Components:
IBM System Storage DS3000 Storage Manager 3 Client,
IBM System Storage DS3000 Storage Manager 3 Utilities
Required Disk Space
632 MB
Available Disk Space
506 MB
PRESS <ENTER> TO CONTINUE:
7. The installation is now performed into the directory /opt/IBM_DS. After successful
installation, a similar message as in Example 5-6 on page 151 will be shown.
To Next Page
Loading...
Need help?
General