Chapter 9. Administration - Logical Tab 243
Draft Document for Review March 28, 2011 12:24 pm 7914Admin_Logical.fm
Figure 9-22 Create logical drive - Completed
8. The new Logical Drive will be formatted, and in the Properties pane of Storage Manager
you can check the progress of this operation (see Figure 9-23). The Logical Drive icon in
the Logical pane is marked by clock symbol during this process.
Figure 9-23 Logical Drive formatted
9. After the format is complete, the new Logical Drive is ready to be mapped to host. You can
repeat the same process for creating other arrays or logical drives.
To Next Page
Loading...
Need help?
General