Table 13. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
4000004a-00000000 SNMP [arg1]
disabled by user
[arg2] .
Info A user disabled
SNMPv1 or
SNMPv3 or Traps.
No action; information only.
4000004b-00000000 SNMPv1 [arg1] set
by user [arg2]:
Name=[arg3],
AccessType=[arg4],
Address=[arg5].
Info A user changed the
SNMP community
string.
No action; information only.
4000004c-00000000 LDAP Server
configuration set by
user [arg1]:
SelectionMethod=[arg2],
DomainName=[arg3],
Server1=[arg4],
Server2=[arg5],
Server3=[arg6],
Server4=[arg7].
Info A user changed the
LDAP server
configuration.
No action; information only.
4000004d-00000000 LDAP set by user
[arg1]:
RootDN=[arg2],
UIDSearchAttribute=[arg3],
BindingMethod=[arg4],
EnhancedRBS=[arg5],
TargetName=[arg6],
GroupFilter=[arg7],
GroupAttribute=[arg8],
LoginAttribute=[arg9].
Info A user configured
an LDAP
Miscellaneous
setting.
No action; information only.
4000004e-00000000 Serial Redirection set
by user [arg1]:
Mode=[arg2],
BaudRate=[arg3],
StopBits=[arg4],
Parity=[arg5],
SessionTerminateSequence=[arg6].
Info A user configured
the Serial Port
mode.
No action; information only.
4000004f-00000000 Date and Time set by
user [arg1]:
Date=[arg2],
Time-[arg3], DST
Auto-adjust=[arg4],
Timezone=[arg5].
Info A user configured
the Date and Time
settings.
No action; information only.
40000050-00000000 Server General
Settings set by user
[arg1]: Name=[arg2],
Contact=[arg3],
Location=[arg4],
Room=[arg5],
RackID=[arg6], Rack
U-position=[arg7].
Info A user configured
the Location
setting.
No action; information only.
40000051-00000000 Server Power Off
Delay set to [arg1]
by user [arg2].
Info A user configured
the Server Power
Off Delay.
No action; information only.
Chapter 4. Troubleshooting 187
To Next Page
Loading...
Need help?
General