The optional PCI riser-card assembly 2 is dedicated for an internal ServeRAID
adapter. If your server does not come with PCI riser-card assembly 2, you may
order it for hardware RAID upgrade or for installing additional hard disk drives.
Installation guidelines
Attention: Static electricity that is released to internal server components when
the server is powered-on might cause the system to halt, which might result in the
loss of data. To avoid this potential problem, always use an electrostatic-discharge
wrist strap or other grounding system when removing or installing a hot-swap
devices.
Before you install optional devices, read the following information:
v Read the safety information that begins on page Safety and the guidelines in
“Handling static-sensitive devices” on page 32. This information will help you
work safely.
v Make sure that the devices that you are installing are supported.
v Make sure that the devices that you are installing are supported. For a list of
supported optional devices for the server, go to http://www.ibm.com/systems/
info/x86servers/serverproven/compat/us/.
v When you install your new server, take the opportunity to download and apply
the most recent firmware updates. This step will help to ensure that any known
issues are addressed and that your server is ready to function at maximum
levels of performance. To download firmware updates for your server, go to
http://www.ibm.com/support/fixcentral/.
Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level
of code is supported for the cluster solution before you update the code.
For additional information about tools for updating, managing, and deploying
firmware, see the ToolsCenter for System x and BladeCenter at
http://publib.boulder.ibm.com/infocenter/toolsctr/v1r0/index.jsp.
v Before you install optional hardware, make sure that the server is working
correctly. Start the server, and make sure that the operating system starts, if an
operating system is installed, or that a 19990305 error code is displayed,
30 System x3530 M4 Type 7160: Installation and Service Guide
To Next Page
Loading...
Need help?
General