4. Reinstall the filler panel that you removed
5. Turn on the peripheral devices and the server.
Removing a CD/DVD drive
To remove a CD/DVD drive, complete the following steps:
1. Read the safety information that begins on page Safety and “Installation
guidelines” on page 30.
2. Turn off the server (see “Turning off the server” on page 21) and all attached
peripheral devices. Disconnect all power cords; then, disconnect all external
cables from the server.
3. Remove the top cover (see “Removing the server top cover” on page 33).
4. Locate the blue release tab on the rear of the drive bay; then, while you press
the tab, push the CD/DVD drive toward the front of the server.
Chapter 6. Removing and replacing components 305
To Next Page
Loading...
Need help?
General