17. Start the Setup utility and reset the configuration.
v Set the system date and time.
v Set the power-on password.
v Reconfigure the server.
See “Using the Setup utility” on page 40 for more details.
18. Either update the server with the latest RAID firmware or restore the
pre-existing firmware from a diskette or CD image.
19. Update the UUID (see “Updating the Universal Unique Identifier (UUID)” on
page 55).
20. Update the DMI/SMBIOS (see “Updating the DMI/SMBIOS data” on page
57).
21. Reactivate any Features on Demand features.
Chapter 5. Removing and replacing components 267
To Next Page
Loading...
